Day26 Putting in webfloor frame 3
Grinding and priming again was the order of the day, although we did get a break cutting and installing frame 3's web floor! Exhausting as it all is, we both feel the muscles coming back, which I'm sure we'll need for laying on the plate.  
We also let back out the aft stringers, ( from the transom incident haha! ) and ground out the welds. Some more support, in the form of diagonal angle bar, was attached to help pin down the aft section frame as the stringers were still trying to to lift the frames up off of the strongback even after the aft stembar was installed. Pretty much have the whole existing framework ground and primed.

Day 26:
8 hours - More Grinding and priming. Put in web floor on frame 3.

DAY 25

DAY 27